Details
Specifications :
- Flow rate : 0.2 L/min
- Power consumption : <50W
- Voltage : 24V DC
- Max. load : 1.2A
- Produce capacity : 75 GPD
- Water storage tank : 2 Gallon
- Max/min inlet pressure : 0.27 - 0.04 MPa
- Working pressure : 0.85 MPa
- Cartridge type : 5 micron PP Filter, Activated carbon, 1 micron PP Filter, RO membrane Filmtec 75 GPD, AICRO
- Product dimension : 250 x 460 x 400 mm
Features :
- Solenoid shut off valve.
- Storage tank - stores the readyto drink permeated water.
- Faucet - to dispense permeated water stored in the tank.
- Electric pump - used in waters above 1000 ppm TDS or to increase volume and quality of the permeate water when inlet pressure is lower than 1.5 Bar.
- 3 - Coloured LED indicates unit current situation (Green: Producing water, Blue: Unit on standby, FlashingGreen: Low inlet pressure, Flashing red: inner leak).
- Feed water valve - Connect tothe cold water line as to supply the RO system.
- Drain clamp assembly connected to the drain to remove reject water from the RO system.
- Plastic tubing supplies feed, permeate and reject water.