RO-TFC-4400/ 50 Hz

(For 0.5 M3/H)

Qty = 1 SET

Performance:

Design Permeate Flow rate: 0.50-0.70 m3/h (3.06 GPM)

Design Feed capacity : 0.92 m3/h (4.08 GPM)

Concentrate Capacity: 0.22 m3/h (1.02 GPM)

Recovery: 75 %

Design Temperature: 20 to 25oC

Control:

- Selector switches: Power (On/ Off), Feed pump (Hand/ off/ Auto),

- RO feed pump starter: To be located on RO feed pump

                                      Flushing (Hand/ Off)

- Create Controller

Instrumentation:

- Flow indicators: Permeate, Concentrate : to be located on RO steel panel

- Pressure indicators: Pre-filter, Post-filter : to be located before micron filter

                                 Pump discharge       : to be located after RO feed pump

                                 Concentrate             : to be located at RO concentrate

- Pressure Switch: RO feed Pump inlet

Materials of Construction:

High-Pressure Piping: Stainless steel / Wespex /PVC

Low-Pressure Piping: PVC /Wespex

Frame: Stainless steel

RO feed Pump:

Quantity: 1 Set

Manufacturer: CNP (or equal)

Motor: 1.50 kW

Membrane Elements:

Quantity: 2 pcs

Manufacturer: Vontron/LUSO

Style: Thin film composite (TFC)

Type: Spiral-wound elements

Membrane Housings:

Quantity: 2 Sets

Type of Housings: FRP, 4-inch (10 cm) diameter

Banking Arrangement: Array#1: 1 housing

                                    Array#2: 1 housing

Cartridge Filtration:

Quantity: 1 Set

Cartridges filter: 5 micron, nominal

Cartridge length: 20”

Installation and Utility Requirements:

Inlet: 1” NPT

Permeate: 3/4" NPT

Concentrate: 1/2" NPT

CIP Inlet: 3/4” NPT

CIP outlet: 3/4” NPT